- Sheets
Components
-
Color:
 
Serial No.
 
Version no.:
 
IEC/EN 60893-3-1:
 
DIN 7735:
 
NEMA LI 1:
 

Mechanical properties   Test method Thickness Value Unit  
Flexural strength at RT ISO 178 ≥1,6 mm MPa
Flexural strength at elevated temp. ISO 178 ≥1,6 mm MPa
Modulus of elasticity ISO 178 ≥1,6 mm MPa
Compressive strength ISO 604 ≥5,0 mm MPa
Izod impact strength, parallel ISO 180/2A ≥5,0 mm KJ/m2
Shearing strength, parallel IEC 60893-2 ≥5,0 mm MPa
Tensile strength   ISO 527 ≥1,6 mm MPa
Electrical properties   Test method Thickness Value Unit  
Electric strength in oil at 90°C IEC 60243-1 3,0 mm kV/mm
Electric strength in oil at 90°C IEC 60243-1 ≥3,0 mm kV/25mm
Permittivity 50 Hz   IEC 60250 ≥1,6 mm  
Permittivity 1 MHz   IEC 60250 ≥1,6 mm  
Dissipation factor 50 Hz   IEC 60250 ≥1,6 mm  
Dissipation factor 1 MHz   IEC 60250 ≥1,6 mm  
Insulation
resistance after immersion in water
  IEC 60167 All
Comparative
tracking index
  IEC 60112 ≥3,0 mm CTI
Physical and thermal properties   Test method Thickness Value Unit  
Thermal endurance index 20.000 h (T.I.)   IEC 60216 ≥3,0 mm °C
Flammability   IEC 60695-11-10  
Density   ISO 1183-A All g/cm3
Water absorption   ISO 62-1 50x50x3 mm mg
Characteristics and applications
Notes:
A) Thickness > 8mm.
B) Thickness  ≥ 4,0mm 
C) 1 h/130°C / measured at 130°C
D) 1 h/150°C / measured at 150°C
E)  1 h/180°C / measured at 180°C
F)  1 h/200°C / measured at 200°C
* Conditioning:
1: 24h/23°C/50%RH
2: 24h/23°C/50%RH + 1h/Oil 90°C
3: 96h/105°C + 1h/23°C/20%RH
4: 24h/50°C + 24h/water 23°C
5: 96h/105°C + 1h/Oil 90°
The above values are average values based on the results of extensive testing in our laboratories. ELEKTRO-ISOLA A/S cannot accept responsibility for the performance of our products in applications over which we have no control. Elektro-Isola A/S reserves the right to amend the above data without notice and without providing further information. Moreover, we refer to our general disclaimer.