- Tubes
Components
-
Color:
 
Serial No.
 
Version no.:
 
IEC/EN 61212-3-1:
 
DIN 7735:
 
NEMA LI 1:
 

Mechanical properties   Test method Dimension Value Unit  
Flexural strength ISO 178 id>100 mm MPa
Compressive strength axial ISO 604   MPa
Cohesion between layers IEC 61212-2 5.3 id<100 mm MPa
Electrical properties   Test method Dimension Value Unit  
Electric strength in oil at 90°C IEC 60243-1 B)3,0 mm kV/mm
Electric strength in oil at 90°C IEC 60243-1 B)3,0 mm kV/25mm
Permittivity 50 Hz   IEC 60250    
Permittivity 1 MHz   IEC 60250    
Dissipation factor 50 Hz   IEC 60250    
Dissipation factor 1 MHz   IEC 60250    
Insulation
resistance after immersion in water
  IEC 60167 A)
Physical and thermal properties   Test method Dimension Value Unit  
Thermal endurance index 20.000 h (T.I.)   IEC 60216 ≥3,0 mm °C
Density   ISO 1183-A All g/cm³
Water absorption   ISO 62-1 mg/cm²
Characteristics and applications
Notes:
A) ID > 8 mm and/or OD > 10 mm
B) Wall thickness
C) 230 MPa measured at 150°C
D) Wall thickness ≥ 4,0 mm
* Conditioning:
1: 24h/23°C/50%RH
2: 24h/23°C/50%RH + 1h/Oil 90°C
3: 96h/105°C + 1h/23°C/20%RH
4: 24h/50°C + 24h/water 23°C
5: 96h/105°C + 1h/Oil 90°
The above values are average values based on the results of extensive testing in our laboratories. ELEKTRO-ISOLA A/S cannot accept responsibility for the performance of our products in applications over which we have no control. Elektro-Isola A/S reserves the right to amend the above data without notice and without providing further information. Moreover, we refer to our general disclaimer.